Honda305.com Forum

You are most likely correct concerning loctite previously applied to the two front sprocket retaining bolts. The bolts have 10mm heads however there is a number 8 on each head. My 3/8 inch ratchet 10mm socket just did not fit properly on the head, just kept slipping off. A 1/4 inch 10 mm socket with...

Once again, I appreciate you sharing your Honda fuel system mechanical experience.
I would still be testing fuel petcocks for leaks.
Thank you!

Help!
I tried loosening/removing the 2 bolts holding the front sprocket on my project 1967 CL77, however the 10mm socket keeps slipping off the bolt head.
The bolts are very tight too (as they should be).
What am I doing wrong?
As always, thank you.

Installing the two fiber washers purchased from the local hardware store in place of the two lock-washers provided by the manufacturer prevented the petcock from leaking fuel out of the spigots in the "stop" position!

Appreciate all your helpful comments.
Thank you!

Help! Petcock No. 1: I recently replaced the old petcock on my CL77 with a brand new reproduction. Before installing the fuel tank on the bike I tested the "new" petcock for leaks. The washer between the tank and the petcock sealed properly without any leaks. However, in the stop position, the fuel ...

Need a proper 19 inch wheel and brake for my 1967 CL77.
Does anyone out there have one for sale that is in good shape?
I have an 18 inch wheel and brake if anyone is interested in a trade.
Thank you.

Need some help locating a functional horn for my cl77.
Believe it to be a 1967 model.
Please reply if you have one for sale.
Thank you in advance.