Page 2 of 2
Posted: Sat Mar 20, 2010 9:13 am
by greg78gs750
hey, another way that works pretty well is to link them from a photobucket account....just to give you another option....
greg
igition switch
Posted: Sat Mar 20, 2010 10:29 am
by mike1969
Appears to be from a CB 160,
If you could show a picture of all of the wires going in to the socket I could tell for sure.
Ignition ID
Posted: Sat Mar 20, 2010 11:57 am
by honda carl
Mike- I'm not sure I'm following your request. Should I take a photo of the wires at the point where they are routed into the plastic connector or where the wires are soldered on the back of the switch itself (which is covered by the rubber boot)? Thanks.
Carl
ignition switch
Posted: Sat Mar 20, 2010 1:18 pm
by mike1969
Carl, Where they go into the plastic connector. I need to see all of the colors of the wires and their positions in it.
Mike
Ignition ID
Posted: Sun Mar 21, 2010 7:03 am
by honda carl
Mike- I checked out some CB160 switches on ebay and they look like mine. But to be sure, I'm attaching a couple more photos showing the wiring. Thanks again for your help.
And thanks to everyone who responded.
Carl
ignition
Posted: Sun Mar 21, 2010 7:37 am
by mike1969
Carl,
Thanks for the extra pics. It is a cb160, cl160 switch.
Part no. 35010-216-000
Mike