Page 8 of 8
Posted: Thu Apr 03, 2008 3:12 pm
by Macgyver5
more
Posted: Thu Apr 03, 2008 3:14 pm
by Macgyver5
and more still...
Posted: Thu Apr 03, 2008 5:05 pm
by joeweir1
Kickstrart pawl is little part that fell out and should be a spring also in there.
Posted: Fri Apr 04, 2008 2:02 pm
by Macgyver5
So after talking to Davo and checking my parts manual... it seems I should put this back together...???... Man all of those pics and only one comment... whats a guy to think... =0)
-B-
Posted: Fri Apr 04, 2008 3:53 pm
by joeweir1
Mac-I was having trouble with my CA77 motor shifting from first to second when I first got it on the road until it warmed-up.It would actually get stuck and shifter would not move.I finally had pulled the engine and with LM's help by phone did what you did and split the case and tore everything out and could really not find anything that was causing it and put it back together.I had another engine and just thru it in.Have yet to try the one that stuck again.Best bet may be just to button it up and give it a try.It may work fine.Joe
Posted: Sat Apr 12, 2008 3:41 am
by Macgyver5
I believe that I found out what was causing this shifting problem... we'll se tomorrow... As I was putting everything back together I noticed that the shift fork that turns the drum gear had some interesting wear... upon further inspection I noticed that the bottom of the contact points were worn of at 45 deg angles causing it not to push the drum gear quite as far as it should and then would catch on it's return... I've found a new one and it arrived today... we'll see how it goes... I'll post pics tomorrow of everything... also if anyone else has seen this or has useful info please let me know....
Thanks
-Brandon-
Posted: Sun Apr 19, 2009 1:40 am
by Durangoman
You gunna leave us hanging like that?