Page 37 of 41
Posted: Fri Mar 17, 2017 7:27 pm
by Seadog
I've searched for a reference and cannot find one. The "Distribution Box" schematic shows the outside of the cover, not the inside. It seems to me that it's unlike Honda to provide a part, then not provide for a replacement, but the fact is that the cover does have provision for that piece. It's not an add-on. Perhaps they thought that the rubber integral to the cover and was not replaceable. An example of this is the rubber boot on the power cable to the starter solenoid. No part number.
LOUD MOUSE wrote:I'll admit I don't know all there is to know abut the DREAM bikes and parts.
I do have a question though as I have seen several.
Where in the parts book is shown a rubber strip that HONDA installed on those covers? ........lm
Posted: Fri Mar 17, 2017 10:37 pm
by LOUD MOUSE
I've found many areas/parts of these bikes where there was/is something there but it was never offered as a replacement with a parts number.
I did look at my parts book and I really don't see a rubber/or anything for that surface. ..................lm
Seadog wrote:I've searched for a reference and cannot find one. The "Distribution Box" schematic shows the outside of the cover, not the inside. It seems to me that it's unlike Honda to provide a part, then not provide for a replacement, but the fact is that the cover does have provision for that piece. It's not an add-on. Perhaps they thought that the rubber integral to the cover and was not replaceable. An example of this is the rubber boot on the power cable to the starter solenoid. No part number.
LOUD MOUSE wrote:I'll admit I don't know all there is to know abut the DREAM bikes and parts.
I do have a question though as I have seen several.
Where in the parts book is shown a rubber strip that HONDA installed on those covers? ........lm
Posted: Sat Mar 25, 2017 1:18 pm
by Seadog
I managed to paint the clutch cover a few days ago and it sits on top of a bookcase in the warmth of the house curing. I'll give it a week or so. I've put the bike away until then. Meanwhile, I started getting the Superhawk ready for summer.
Posted: Sat Mar 25, 2017 4:16 pm
by LOUD MOUSE
but the fact is that the cover does have provision for that piece. It's not an add-on.
May we see a pic of this?. ....................lm
Seadog wrote:I've searched for a reference and cannot find one. The "Distribution Box" schematic shows the outside of the cover, not the inside. It seems to me that it's unlike Honda to provide a part, then not provide for a replacement, but the fact is that the cover does have provision for that piece. It's not an add-on. Perhaps they thought that the rubber integral to the cover and was not replaceable. An example of this is the rubber boot on the power cable to the starter solenoid. No part number.
LOUD MOUSE wrote:I'll admit I don't know all there is to know abut the DREAM bikes and parts.
I do have a question though as I have seen several.
Where in the parts book is shown a rubber strip that HONDA installed on those covers? ........lm
Posted: Sat Mar 25, 2017 6:04 pm
by Seadog
Yes and no. The bike is presently stored in my neighbor's garage, but I have another cover with the same channel. In the pics, below, you can see itl across the top and about half way down the sides. An old piece of rubber material is still in it.
LOUD MOUSE wrote:"but the fact is that the cover does have provision for that piece. It's not an add-on".
May we see a pic of this?. ....................lm
Posted: Sat Mar 25, 2017 9:37 pm
by LOUD MOUSE
Thanks for the pics as I don't RECALL ever seeing that.
I have a couple of covers and when I can find them I may have one of the type you show.
I don't recall that are and must thank you for helping me learn more of these bikes. ............lm
Seadog wrote:Yes and no. The bike is presently stored in my neighbor's garage, but I have another cover with the same channel. In the pics, below, you can see itl across the top and about half way down the sides. An old piece of rubber material is still in it.
LOUD MOUSE wrote:"but the fact is that the cover does have provision for that piece. It's not an add-on".
May we see a pic of this?. ....................lm
Posted: Sun Mar 26, 2017 7:55 am
by Seadog
I'm happy to help, as you do for me and many others.
LOUD MOUSE wrote:Thanks for the pics as I don't RECALL ever seeing that.
I have a couple of covers and when I can find them I may have one of the type you show.
I don't recall that are and must thank you for helping me learn more of these bikes. ............lm