Page 161 of 167
Re: seat
Posted: Mon Apr 16, 2018 1:31 pm
by G-Man
Alan
Yes I have. Just stripping these to get the details for the cover. Mine had been recovered and the pan is very rusty. I am going to have a go at re-making the strips with the little teeth on as mine are all rotted away.
G
alan curtis wrote:Graham, didn't you have a seat with 61 seat brackets on.
Posted: Mon Apr 16, 2018 1:53 pm
by alan curtis
Graham.
There is a company that sells them, but they look a little on the large size, took all mine off, and its stuck on, may do another seat, as i don't feel mine is quite right. i have another set of seat brackets.
Posted: Mon Apr 16, 2018 2:48 pm
by John Watson
www.pandkclassicbikes.co.uk are the ones you are thinking about, Alan. They do good work but it does rather cost.
seat
Posted: Mon Apr 16, 2018 3:13 pm
by alan curtis
Posted: Tue May 08, 2018 12:52 pm
by G-Man
I picked up the seat and a later 'sister' seat from the blasters today. Chemical cleaning just wasn't getting into all the corners and areas of damage.
I've now got all the damage exposed and a good example of what it should look like.
Underneath is the major difference as the '61 seat has bolted-on brackets and the side pieces appear to be welded on rather than being one big pressing. My main interest is in copying the 'tang' strips so that I can attach the cover in th ecorrect way.
These pieces are spot welded to the seat pan and I am hoping to get some new ones laser cut. I don't like the look of the available replacements so I'll do a drawing and get a quantity made.
My seat has lost virtually all of its tangs so I'll just grind that down ready for the replacements.
I'm also going to make and weld on some strengthening plates to reinforce the mounts. I realize why I have been putting this off fro so long.... :-)
G
seat
Posted: Wed May 09, 2018 3:16 am
by alan curtis
Graham,had to do the same with mine, grind all the tangs off, you could put me down for a couple of strips, as i am not happy with my seat..
Re: seat
Posted: Wed May 09, 2018 5:05 am
by G-Man
Will do.
Graham
alan curtis wrote:Graham,had to do the same with mine, grind all the tangs off, you could put me down for a couple of strips, as i am not happy with my seat..