honda305.com Forum

Working on rebuilding the carbs on my '65 CL77. Does anyone know where I can get the small round gaskets for the bowl drain screw, inlet needle seat, and fuel inlet banjo? When I look up the Honda parts fiche online, there are no separate part numbers listed for these items.

Look for a white tag on the main wire harness, if it's still there it will have the year of production on it.

I think they are both very cool. Not a v-twin fan at all, but in my opinion these have way more character and appeal than those custom choppers everyone is building these days. Flattracker is my favorite of the two.

Looking for a decent original handlebar for CL77, the bike I have has non-correct bars. Need to be straight/not bent at all. Some peppering on chrome is no problem.

Also could use a nice petcock bowl and at least 2 tank badge screws for my '67 CB77. I believe the petcock was used on a variety of ...

Simple green and a wet brass brush works wonders. The brass will not scratch the chrome, simple green dissolves the rust and it looks awesome when done. I've seen many bikes cleaned with steel wool and it leaves the chrome scratchy and dull. For show chrome that is already nice but just needs ...

As with many bikes of the '60s and prior, there is only a brake switch on the rear brake. No switch on the front brake. That didn't come standard on many bikes until the '70s.

Looking for a good set of mirrors & switches for my 1967 CB77. No repro stuff please. It's a low hour original bike, mirrors were missing when I bought it. The bakelite pieces inside the left switch are broken, right side is missing the electric start pieces. Email robmanero@comcast.net. Thanks!